Makita HK1820 Instruction Manual

Also see for HK1820: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

4 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel HK1820Blows per minute (min -1 ) 0 - 3,200Overall length 351 mmNet weight 3.4 kgSafety class II• Due to our continuing programme of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003Intended useThe tool is intended for chiselling work in concrete, brickand stone as well as for driving and compacting withappropriate accessories.Power supplyThe tool should be connected only to a power supplyof the same voltage as indicated on the nameplate,and can only be operated on single-phase AC supply.They are double-insulated in accordance with EuropeanStandard and can, therefore, also be used from socketswithout earth wire.NoiseThe typical A-weighted noise level determined accord-ing to EN60745:Sound pressure level (LpA ) : 83 dB (A)Sound power level (LWA ) : 94 dB (A)Uncertainty (K) : 3 dB (A)NOTE: The declared noise emission value(s) hasbeen measured in accordance with a standard testmethod and may be used for comparing one tool withanother.NOTE: The declared noise emission value(s)may also be used in a preliminary assessment ofexposure.WARNING: Wear ear protection.WARNING: The noise emission during actualuse of the power tool can differ from the declaredvalue(s) depending on the ways in which thetool is used especially what kind of workpiece isprocessed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).VibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN60745:Work mode : chisellingVibration emission (a h,CHeq) : 10.0 m/s 2Uncertainty (K) : 1.5 m/s2NOTE: The declared vibration total value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared vibration total value(s) may alsobe used in a preliminary assessment of exposure.WARNING: The vibration emission duringactual use of the power tool can differ from thedeclared value(s) depending on the ways in whichthe tool is used especially what kind of workpieceis processed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).EC Declaration of ConformityFor European countries onlyThe EC declaration of conformity is included as Annex Ato this instruction manual.General Power Tool Safety WarningsWARNING Read all safety warnings and all instruc-tions. Failure to follow the warnings and instructions mayresult in electric shock, fire and/or serious injury.Save all warnings and instructions forfuture reference.HAMMER SAFETY WARNINGS1. Wear ear protectors. Exposure to noise cancause hearing loss.2. Use auxiliary handle(s), if supplied with thetool. Loss of control can cause personal injury.3. Hold power tool by insulated gripping sur-faces, when performing an operation wherethe cutting accessory may contact hidden wir-ing or its own cord. Cutting accessory contactinga "live" wire may make exposed metal parts of thepower tool "live" and could give the operator anelectric shock.

/ 28

Related manuals for Makita HK1820

Makita HK1820 Instruction Manual

Makita HK1820L Instruction Manual

This manual is suitable for:

HK1820

Makita HK1820 Instruction Manual

Product

Learn More

Legal