Makita GTP01 Instruction Manual

2 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: GTP01Pin nail size ø0.6 mm x 15, 18, 19, 25, 30, 35 mm(ø0.024″ x 5/8, 11/16, 3/4, 1, 1-3/16, 1-3/8″)Pin nail magazine capacity 100 pcs.Dimensions with BL4025, without hook (L x W x H) 265 mm x 86 mm x 226 mm (10-3/8″ x 3-3/8″ x 8-7/8″)Rated voltage D.C. 36 V - 40 V maxNet weight 2.4 - 3.0 kg(5.3 - 6.6 lbs)• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications and battery cartridge may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combinations, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridge and chargerBattery cartridge BL4020* / BL4025* / BL4040 / BL4050F* : Recommended batteryCharger DC40RA / DC40RB / DC40RC• Some of the battery cartridges and chargers listed above may not be available depending on your region ofresidence.WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridgesand chargers may cause injury and/or fire.SAFETY WARNINGSGeneral power tool safety warningsWARNING: Read all safety warnings, instruc-tions, illustrations and specifications providedwith this power tool. Failure to follow all instructionslisted below may result in electric shock, fire and/orserious injury.Save all warnings and instruc-tions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Work area safety1. Keep work area clean and well lit. Cluttered ordark areas invite accidents.2. Do not operate power tools in explosive atmo-spheres, such as in the presence of flammableliquids, gases or dust. Power tools create sparkswhich may ignite the dust or fumes.3. Keep children and bystanders away whileoperating a power tool. Distractions can causeyou to lose control.Electrical Safety1. Power tool plugs must match the outlet. Never modifythe plug in any way. Do not use any adapter plugswith earthed (grounded) power tools. Unmodified plugsand matching outlets will reduce risk of electric shock.2. Avoid body contact with earthed or groundedsurfaces, such as pipes, radiators, ranges andrefrigerators. There is an increased risk of elec-tric shock if your body is earthed or grounded.3. Do not expose power tools to rain or wet con-ditions. Water entering a power tool will increasethe risk of electric shock.4. Do not abuse the cord. Never use the cord forcarrying, pulling or unplugging the power tool.Keep cord away from heat, oil, sharp edgesor moving parts. Damaged or entangled cordsincrease the risk of electric shock.5. When operating a power tool outdoors, use anextension cord suitable for outdoor use. Use of a cordsuitable for outdoor use reduces the risk of electric shock.6. If operating a power tool in a damp location isunavoidable, use a ground fault circuit inter-rupter (GFCI) protected supply. Use of a GFCIreduces the risk of electric shock.7. Power tools can produce electromagneticfields (EMF) that are not harmful to the user.However, users of pacemakers and other similarmedical devices should contact the maker of theirdevice and/or doctor for advice before operatingthis power tool.