Makita GA021G Instruction Manual

9 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: GA021G GA022G GA023G GA024G GA025G GA026GWheel diameter 100 mm(4″)115 mm(4-1/2″)125 mm(5″)100mm(4″)115 mm(4-1/2″)125 mm(5″)Max. wheel thickness 6.4 mm 7.2 mm 6.4 mm 7.2 mmSpindle thread M10 M14 or 5/8″(country specific)M10 M14 or 5/8″(country specific)Rated speed (n) 8,500 min -1Overall length with BL4025 413 mmwith BL4040 425 mmNet weight 2.8 - 3.4 kg 3.0 - 3.6 kg 3.0 - 4.4 kg 2.8 - 3.4 kg 2.9 - 3.5 kg 2.9 - 4.4 kgRated voltage D.C. 36 V - 40 V max• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridge and chargerBattery cartridge BL4025 / BL4040Charger DC40RA• Some of the battery cartridges and chargers listed above may not be available depending on your region ofresidence.WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridgesand chargers may cause injury and/or fire.Intended useThe tool is intended for grinding, sanding, wire brushingand cutting of metal and stone materials without the useof water.NoiseThe typical A-weighted noise level determined according to EN60745-2-3:Model Sound pressurelevel (LpA) : (dB(A))Sound power level(LWA) : (dB(A))Uncertainty (K) :(dB(A))GA021G 81 92 3GA022G 81 92 3GA023G 81 92 3GA024G 81 92 3GA025G 81 92 3GA026G 81 92 3NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method andmay be used for comparing one tool with another.NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.