8 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: DUC303 DUC353 DUC400Overall length (without guide bar) 443 mmRated voltage D.C. 36 VStandard battery cartridge BL1815N, BL1820, BL1820B, BL1830, BL1830B, BL1840,BL1840B, BL1850, BL1850B, BL1860BNet weight(when using BL1815N)with 90PX 4.6 kg 4.7 kg 4.8 kgwith 91PX 4.7 kg 4.8 kg 4.9 kgGuide bar Guide bar length 300 mm 350 mm 400 mmCutting length 280 mm 330 mm 375 mmSaw chain Type(refer to the table below)90PX91PXNumber of drive links 46 52 56Sprocket Number of teeth 6Pitch 3/8″Recommended guide bar length 300 - 400 mmChain speed 0 - 20 m/s(0 - 1,200 m/min)Chain oil tank volume 200 cm3Saw chain and guide barType: 90PX 91PXPitch 3/8″ 3/8″Gauge 1.1 mm 1.3 mmGuide bar type Sprocket nose bar• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury mayresult.SymbolsThe following show the symbols used for the equip-ment. Be sure that you understand their meaning beforeuse.Read instruction manual.Wear safety glasses.Wear ear protection.Wear a helmet, goggles and ear protection.Use appropriate protection for foot-leg andhand-arm.Do not expose to moisture.Maximum permissible cut lengthDirection of chain travelSaw chain oil adjustmentCdNi-MHLi-ionOnly for EU countriesDo not dispose of electric equipment orbattery pack together with household wastematerial!In observance of the European Directives,on Waste Electric and ElectronicEquipment and Batteries and Accumulatorsand Waste Batteries and Accumulatorsand their implementation in accordancewith national laws, electric equipment andbatteries and battery pack(s) that havereached the end of their life must be col-lected separately and returned to an envi-ronmentally compatible recycling facility.