Makita DRV150 Instruction Manual

Also see for DRV150: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

6 ENGLISH7. Use the power tool, accessories and tool bitsetc. in accordance with these instructions, tak-ing into account the working conditions andthe work to be performed. Use of the power toolfor operations different from those intended couldresult in a hazardous situation.8. Keep handles and grasping surfaces dry,clean and free from oil and grease. Slipperyhandles and grasping surfaces do not allow forsafe handling and control of the tool in unexpectedsituations.9. When using the tool, do not wear cloth workgloves which may be entangled. The entangle-ment of cloth work gloves in the moving parts mayresult in personal injury.Battery tool use and care1. Recharge only with the charger specified bythe manufacturer. A charger that is suitable forone type of battery pack may create a risk of firewhen used with another battery pack.2. Use power tools only with specifically desig-nated battery packs. Use of any other batterypacks may create a risk of injury and fire.3. When battery pack is not in use, keep it awayfrom other metal objects, like paper clips,coins, keys, nails, screws or other small metalobjects, that can make a connection from oneterminal to another. Shorting the battery termi-nals together may cause burns or a fire.4. Under abusive conditions, liquid may beejected from the battery; avoid contact. If con-tact accidentally occurs, flush with water. Ifliquid contacts eyes, additionally seek medicalhelp. Liquid ejected from the battery may causeirritation or burns.5. Do not use a battery pack or tool that is dam-aged or modified. Damaged or modified batteriesmay exhibit unpredictable behaviour resulting infire, explosion or risk of injury.6. Do not expose a battery pack or tool to fire orexcessive temperature. Exposure to fire or tem-perature above 130 °C may cause explosion.7. Follow all charging instructions and do notcharge the battery pack or tool outside thetemperature range specified in the instruc-tions. Charging improperly or at temperaturesoutside the specified range may damage thebattery and increase the risk of fire.Service1. Have your power tool serviced by a qualifiedrepair person using only identical replacementparts. This will ensure that the safety of the powertool is maintained.2. Never service damaged battery packs. Serviceof battery packs should only be performed by themanufacturer or authorized service providers.3. Follow instruction for lubricating and chang-ing accessories.Cordless rivet gun safety warnings1. Hold the tool firmly.2. Keep hands away from moving parts.3. Always be sure you have a firm footing. Besure no one is below when using the tool inhigh locations.4. Be careful not to drop the broken off mandrelfrom high locations. Doing so may cause anaccident or injury.5. Do not scatter the broken off mandrels on thefloor. You may be injured by the sharp end of thebroken off mandrel or by slipping on the mandrel.6. Do not point the tool at a person or yourselfwhen operating the tool. The rivet or broken offmandrel may accidentally ejected, and you maybe injured.Important safety instructions forbattery cartridge1. Before using battery cartridge, read all instruc-tions and cautionary markings on (1) batterycharger, (2) battery, and (3) product usingbattery.2. Do not disassemble battery cartridge.3. If operating time has become excessivelyshorter, stop operating immediately. It mayresult in a risk of overheating, possible burnsand even an explosion.4. If electrolyte gets into your eyes, rinse themout with clear water and seek medical atten-tion right away. It may result in loss of youreyesight.5. Do not short the battery cartridge:(1) Do not touch the terminals with any con-ductive material.(2) Avoid storing battery cartridge in a con-tainer with other metal objects such asnails, coins, etc.(3) Do not expose battery cartridge to wateror rain.A battery short can cause a large currentflow, overheating, possible burns and even abreakdown.6. Do not store the tool and battery cartridge inlocations where the temperature may reach orexceed 50 °C (122 °F).7. Do not incinerate the battery cartridge even ifit is severely damaged or is completely wornout. The battery cartridge can explode in a fire.8. Be careful not to drop or strike battery.9. Do not use a damaged battery.10. The contained lithium-ion batteries are subjectto the Dangerous Goods Legislation require-ments.For commercial transports e.g. by third parties,forwarding agents, special requirement on pack-aging and labeling must be observed.For preparation of the item being shipped, consult-ing an expert for hazardous material is required.Please also observe possibly more detailednational regulations.Tape or mask off open contacts and pack up thebattery in such a manner that it cannot movearound in the packaging.