Makita DCM501Z Instruction Manual

Also see for DCM501: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

610.Do not use appliance for other than intended use.11. Do not open the water tank lid during the brewing cycles.12.Scalding may occur if the filter holder/cafe pod holder is removedduring the brewing cycles.13.Place the appliance on a hard, flat level surface to avoid interruptionof airflow underneath the appliance.14.To reduce the risk of fire or electric shock, do not remove thebottom cover. No user serviceable parts inside. Service and repairshould only be performed by an authorized service center.15. Disconnect the battery cartridge from the appliance before makingany adjustments, changing accessories, or storing appliance. Suchpreventive safety measures reduce the risk of starting the applianceaccidentally.16.Recharge only with the charger specified by the manufacturer. Acharger that is suitable for one type of battery cartridge may createa risk of fire when used with another battery cartridge.17.Use appliances only with specifically designated battery cartridges.Use of any other battery cartridges may create a risk of injury andfire.18.When battery cartridge is not in use, keep it away from other metalobjects, like paper clips, coins, keys, nails, screws or other smallmetal objects, that can make a connection from one terminal toanother. Shorting the battery terminals together may cause burnsor a fire.19.Under abusive conditions, liquid may be ejected from the battery;avoid contact. If contact accidentally occurs, flush with water. Ifliquid contacts eyes, additionally seek medical help. Liquid ejectedfrom the battery may cause irritation or burns.20.Do not use a battery cartridge or appliance that is damaged ormodified. Damaged or modified batteries may exhibit unpredictablebehavior resulting in fire, explosion or risk of injury.21. Do not expose a battery cartridge or appliance to fire or excessivetemperature. Exposure to fire or temperature above 130°C maycause explosion.22.Have servicing performed by a qualified repair person using onlyidentical replacement parts. This will ensure that the safety of theproduct is maintained.23.Follow all charging instructions and do not charge the battery packor tool outside the temperature range specified in the instructions.Charging improperly or at temperatures outside the specifiedrange may damage the battery and increase the risk of fire.