Makita CG100D Instruction Manual

6 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: CG100DMaximum feed force 5,000 NFeed speed 0 - 28 mm/sStroke 300 ml size holder 214 mm600 ml size holder 350 mm800 ml size holder 294 mmOverall length 300ml size holder 404 mm600ml size holder 538 mm800ml size holder 480 mmRated voltage D.C. 10.8 V - 12 V maxStandard battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041BCharger DC10SA / DC10SB / DC10WC / DC10WDNet weight 1.9 - 2.6 kg• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications and battery cartridge may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combinations, according to EPTA-Procedure 01/2014, are shown in the table.Intended useThis tool is intended for applying caulking material tosurface.NoiseThe typical A-weighted noise level determined accord-ing to EN62841:Sound pressure level (LpA ) : 70 dB(A) or lessUncertainty (K) : 3 dB(A)The noise level under working may exceed 80 dB (A).NOTE: The declared noise emission value(s) hasbeen measured in accordance with a standard testmethod and may be used for comparing one tool withanother.NOTE: The declared noise emission value(s)may also be used in a preliminary assessment ofexposure.WARNING: Wear ear protection.WARNING: The noise emission during actualuse of the power tool can differ from the declaredvalue(s) depending on the ways in which thetool is used especially what kind of workpiece isprocessed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).VibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN62841:Work mode: operation without loadVibration emission (a h ) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s2NOTE: The declared vibration total value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared vibration total value(s) may alsobe used in a preliminary assessment of exposure.WARNING: The vibration emission duringactual use of the power tool can differ from thedeclared value(s) depending on the ways in whichthe tool is used especially what kind of workpieceis processed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).EC Declaration of ConformityFor European countries onlyThe EC declaration of conformity is included as Annex Ato this instruction manual.