Makita BJR181 Instruction Manual

Also see for BJR181: Technical information Instruction manual Parts Breakdown Instruction manual Instruction manual

Contents

Makita BJR181 Instruction Manual Manual pdf 3 page image

313. Do not overreach. Keep proper footing and bal-ance at all times. This enables better control of thepower tool in unexpected situations.14. Dress properly. Do not wear loose clothing orjewellery. Keep your hair, clothing, and glovesaway from moving parts. Loose clothes, jewelleryor long hair can be caught in moving parts.15. If devices are provided for the connection ofdust extraction and collection facilities, ensurethese are connected and properly used. Use ofthese devices can reduce dust-related hazards.Power tool use and care16. Do not force the power tool. Use the correctpower tool for your application. The correct powertool will do the job better and safer at the rate forwhich it was designed.17. Do not use the power tool if the switch does notturn it on and off. Any power tool that cannot becontrolled with the switch is dangerous and must berepaired.18. Disconnect the plug from the power source and/or the battery pack from the power tool beforemaking any adjustments, changing accessories,or storing power tools. Such preventive safetymeasures reduce the risk of starting the power toolaccidentally.19. Store idle power tools out of the reach of chil-dren and do not allow persons unfamiliar withthe power tool or these instructions to operatethe power tool. Power tools are dangerous in thehands of untrained users.20. Maintain power tools. Check for misalignment orbinding of moving parts, breakage of parts andany other condition that may affect the powertools operation. If damaged, have the power toolrepaired before use. Many accidents are caused bypoorly maintained power tools.21. Keep cutting tools sharp and clean. Properlymaintained cutting tools with sharp cutting edgesare less likely to bind and are easier to control.22. Use the power tool, accessories and tool bitsetc. in accordance with these instructions and inthe manner intended for the particular type ofpower tool, taking into account the working con-ditions and the work to be performed. Use of thepower tool for operations different from thoseintended could result in a hazardous situation.Battery tool use and care23. Ensure the switch is in the off position beforeinserting battery pack. Inserting the battery packinto power tools that have the switch on invites acci-dents.24. Recharge only with the charger specified by themanufacturer. A charger that is suitable for onetype of battery pack may create a risk of fire whenused with another battery pack.25. Use power tools only with specifically desig-nated battery packs. Use of any other batterypacks may create a risk of injury and fire.26. When battery pack is not in use, keep it awayfrom other metal objects like paper clips, coins,keys, nails, screws, or other small metal objectsthat can make a connection from one terminal toanother. Shorting the battery terminals togethermay cause burns or a fire.27. Under abusive conditions, liquid may be ejectedfrom the battery, avoid contact. If contact acci-dentally occurs, flush with water. If liquid con-tacts eyes, additionally seek medical help. Liquidejected from the battery may cause irritation orburns.Service28. Have your power tool serviced by a qualifiedrepair person using only identical replacementparts. This will ensure that the safety of the powertool is maintained.29. Follow instruction for lubricating and changingaccessories.30. Keep handles dry, clean and free from oil andgrease.SPECIFIC SAFETY RULESGEB008-2DO NOT let comfort or familiarity withproduct (gained from repeated use)replace strict adherence to recipro sawsafety rules. If you use this tool unsafelyor incorrectly, you can suffer serious per-sonal injury.1. Hold power tool by insulated gripping surfaceswhen performing an operation where the cuttingtool may contact hidden wiring or its own cord.Contact with a “live” wire will make exposed metalparts of the tool “live” and shock the operator.2. Use clamps or another practical way to secureand support the workpiece to a stable platform.Holding the work by hand or against your bodyleaves it unstable and may lead to loss of control.3. Always use safety glasses or goggles. Ordinaryeye or sun glasses are NOT safety glasses.4. Avoid cutting nails. Inspect workpiece for anynails and remove them before operation.5. Do not cut oversize workpiece.6. Check for the proper clearance beyond the work-piece before cutting so that the blade will notstrike the floor, workbench, etc.7. Hold the tool firmly.