Makita BAP182 User Manual

4Attaching the optional shoulder strapThe optional shoulder strap can be attached as shown in the illustration. (Fig. 4)OperationAttach the battery adapter to your body for work as shown in the illustration. (Fig. 5)Remaining battery capacity indication (Fig. 6)Press the remaining battery capacity display button to light the indicator lamps and indicate the remaining batterycapacities. The indicator lamps correspond to each battery.NOTE:• The indicated charge may be slightly lower than the actual level during use or immediately after using the product.How to read the remaining battery capacity indicationIndicator lamps (Battery 1 or Battery 2)Remaining charge or indication contents: On : Off50% to 100%20% to 50%0% to 20%Charge the battery• Depending on the conditions of use and the ambient temperature, the remaining capacity may not be indicatedcorrectly.Example of remaining charge indication (Battery 1: 80%, Battery 2: 10%)Battery 1 Battery 2Battery protective functionThe batteries have an internal protective function that automatically stops power output in order to extend the batterylife. When the following states occur during product use, the motor stops automatically, but this is due to the battery’sprotective function, and is not a malfunction.When the battery temperature rises above a certain level, the motor stops automatically, and remains stopped evenwhen the switches are operated. In these cases, stop battery use, remove the batteries from the BAP182, and allowthe batteries to cool or charge the batteries.When the battery capacity becomes low, the product’s motor stops automatically. If the product does not operate evenwhen the switches are operated, remove the batteries from the BAP182 and charge the batteries.NOTE:When the product stops automatically without any BAP182 indicationWhen the product enters an overload state, power output stops automatically in order to extend the battery life. Thisis due to the battery’s protective function, and is not a malfunction. In addition, in these cases the BAP182 does notindicate anything, but this is not a malfunction. When this happens, release the switch, and remove the cause of theoverload. The product can then be used again by operating the switch again.

/ 4

Related manuals for Makita BAP182