Menu
Makita AN923 Instruction Manual
Also see for AN923: Instruction manualInstruction manualParts BreakdownInstruction manualInstruction manual
            |
9007016Make sure that the trigger is locked when the changelever is set to the position.12007017When the tool is not to be used for an extended period oftime, lubricate the tool using pneumatic tool oil and storethe tool in a safe place. Avoid exposure to a directsunlight and/or humid or hot environment.007018000219Maintenance of the compressor, air set and airhose10043171004318After operation, always drain the compressor tank andthe air filter. If moisture is allowed to enter the tool, It mayresult in poor performance and possible tool failure.Check regularly to see if there is sufficient pneumatic oilin the oiler of the air set. Failure to maintain sufficientlubrication will cause O-rings to wear quickly.12004319Keep the air hose away from heat (over 60°C, over140°F), away from chemicals (thinner, strong acids oralkalis). Also, route the hose away from obstacles whichit may become dangerously caught on during operation.Hoses must also be directed away from sharp edges andareas which may lead to damage or abrasion to the hose.StoveThinner0043201. Oiler2. Pneumatic oil1. Air filter1. Drain cock1. Trigger lock2. Change lever |
Related manuals for Makita AN923
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved