Makita AF500HP Instruction Manual

11NOTE:• Some items in the list may be included in the toolpackage as standard accessories. They may differfrom country to country.Noise ENG905-1The typical A-weighted noise level determined accordingto EN792:Sound pressure level (L pA ): 80 dB (A)Uncertainty (K): 3 dB (A)The noise level under working may exceed 80 dB (A).Wear ear protection.Vibration ENG904-2The vibration total value determined according to EN792:Vibration emission (ah ): 2.5 m/s2 or lessUncertainty (K): 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard test methodand may be used for comparing one tool with another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.• Be sure to identify safety measures to protect theoperator that are based on an estimation of exposure inthe actual conditions of use (taking account of all partsof the operating cycle such as the times when the toolis switched off and when it is running idle in addition tothe trigger time).For European countries only ENH003-14EC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine: Pneumatic Pin NailerModel No./ Type: AF500HPare of series production andConforms to the following European Directives:2006/42/ECAnd are manufactured in accordance with the followingstandards or standardised documents:EN792The technical documentation is kept by:Makita International Europe Ltd.Technical Department,Michigan Drive, Tongwell,Milton Keynes, Bucks MK15 8JD, England30. 1. 2009Tomoyasu KatoDirectorMakita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi, 446-8502, JAPAN