Makita 9561CH Instruction Manual

Also see for 9561CH: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

11OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments are recommendedfor use with your Makita tool specified in this manual.The use of any other accessories or attachments mightpresent a risk of injury to persons. Only use accessoryor attachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Wheel guard (wheel cover) for depressed centerwheel / multi disc• Wheel guard (wheel cover) for abrasive cut-off wheel /diamond wheel• Depressed center wheels• Abrasive cut-off wheels• Multi discs• Diamond wheels• Wire cup brushes• Wire bevel brush 85• Abrasive discs• Inner flange• Lock nut for depressed center wheel / abrasive cut-offwheel / multi disc / diamond wheel• Lock nut for abrasive disc• Lock nut wrench• Side grip• Rubber pad• Dust cover attachmentNOTE:• Some items in the list may be included in the tool pack-age as standard accessories. They may differ fromcountry to country. ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Model 9561CVH, 9562CH, 9562CVH, 9564CVSound pressure level (L pA): 83 dB (A)Sound power level (LWA): 94 dB (A)Uncertainty (K): 3 dB (A)Model 9565C, 9565CVSound pressure level (L pA): 82 dB (A)Sound power level (LWA): 93 dB (A)Uncertainty (K): 3 dB (A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum) determinedaccording to EN60745:Model 9561CVHWork mode: surface grinding with normal sidegripVibration emission (ah, AG ): 8.5 m/s2Uncertainty (K): 1.5 m/s 2Work mode: disc sandingVibration emission (ah, DS ): 2.5 m/s2 or lessUncertainty (K): 1.5 m/s 2Model 9562CH, 9562CVHWork mode: surface grinding with normal sidegripVibration emission (a h, AG ): 8.5 m/s2Uncertainty (K): 1.5 m/s 2Work mode: surface grinding with anti vibrationside gripVibration emission (a h, AG ): 7.5 m/s2Uncertainty (K): 1.5 m/s 2Work mode: disc sandingVibration emission (a h, DS): 2.5 m/s 2 or lessUncertainty (K): 1.5 m/s 2Model 9564CVWork mode: surface grinding with normal sidegripVibration emission (a h, AG ): 8.0 m/s2Uncertainty (K): 1.5 m/s 2Work mode: surface grinding with anti vibrationside gripVibration emission (a h, AG ): 8.0 m/s2Uncertainty (K): 1.5 m/s 2Work mode: disc sandingVibration emission (a h, DS): 2.5 m/s 2 or lessUncertainty (K): 1.5 m/s 2Model 9565C, 9565CVWork mode: surface grinding with normal sidegripVibration emission (a h, AG ): 8.0 m/s2Uncertainty (K): 1.5 m/s 2Work mode: surface grinding with anti vibrationside gripVibration emission (a h, AG ): 7.5 m/s2Uncertainty (K): 1.5 m/s 2Work mode: disc sandingVibration emission (a h, DS): 2.5 m/s 2 or lessUncertainty (K): 1.5 m/s 2ENG902-1• The declared vibration emission value has been mea-sured in accordance with the standard test method andmay be used for comparing one tool with another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.• The declared vibration emission value is used for mainapplications of the power tool. However if the powertool is used for other applications, the vibration emis-sion value may be different.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.• Be sure to identify safety measures to protect the oper-ator that are based on an estimation of exposure in theactual conditions of use (taking account of all parts ofthe operating cycle such as the times when the tool isswitched off and when it is running idle in addition tothe trigger time).