Makita 6723DW Instruction Manual

Also see for 6722DW: Instruction manual

92. To rotate the bit holder in a reverse (removing screws) direction, press the left hand side ofthe On/Off switch marked . See figure 6.3. Release the On/Off switch to stop the screwdriver.NOTE:Always use sharp good quality screwdriver bits. The performance and safety of the screwdriver isdependant on the quality of the bits used.4. Using the LED lightThe screwdriver is equipped with an LED light toassist when operating the screwdriver in darkrecesses or other poorly lit areas. To switch theLED light On, press the LED light On/Off switchas shown in figure 7.To switch the LED light Off press the LED lightOn/Off switch again.5. Using the folding handleThe screwdriver is equipped with a foldinghandle for either in-line, or pistol grip use. Whenfolded into the pistol grip position it givesassistance when used in areas that may haverestricted access. See figure 8.To use the folding handle, grip the lower handlewith one hand and move the upper handle to thedesired position with the other hand.Reverse(Removing screws)6Press78