Makita 3600BR Instruction Manual

Contents

Trimmer guideTrimming, curved cuts in veneers for furniture and the like can be done easily withthe trimmer guide. The guide roller ridesthe curve and assures a fine cut.Install the trimmer guide on the guideholder with the wing bolt (8). Tighten thewing bolt (8) only tight enough to hold thetrimmer guide temporarily. Then insert theguide holder into the holes in the tool baseand tighten the wing bolt (A). Adjust thedistance between the bit and the trimmerguide by turning the fine adjusting screw(1.5 mm or about 1/16" per turn). At thedesired distance, tighten the wing bolt(8) to secure the trimmer guide in place.When adjusting the guide roller up or down,loosen the wing bolt (C). After adjustingit, tighten the wing bolt (C) securely.When cutting, move the tool with the guideroller riding the side of the workpiece.Wing bolt (A)Gu ide holder,Wing bolt (B)Wing bolt (elGuide rollerGuide roller9