Mahlkonig EK43 S Original Instruction Manual

Also see for EK 43: Operating instructions Operating instructions Instruction manual Instruction manual

Contents

Mahlkonig EK43 S Original Instruction Manual Manual pdf 15 page image

15eK43 | eK43 S | enBefore usingChecking grinder and scope of deliveryINFORMATION!Risk of damage!The grinder can become damaged if the packaging is opened careless-ly with a sharp knife or other pointed object.– Be very careful when opening.1. Remove the grinder from its packaging.2. Check if the delivery is complete (see Fig. A and B).3. Check if the grinder or any of the individual parts are damaged.If this is the case, do not use the grinder. Contact your supplier (see chap-ter “Maintenance and service”).Setting up the grinderThe grinder’s power cable (14) can be moved to any side of thegrinder and positioned between two of the feet (13) to suit thearea in which the grinder has been set up, or rather the availabil-ity of a socket.1. Place the grinder on a level and stable surface that does not vibrate toprevent it from falling off.2. Make sure that the rubber ring (16) has been properly placed in the beancontainer feeder (2) and is lying flat (see Fig. C and D).3. Place the bean container (1) onto the bean container feeder.In doing so, make sure that the pins in the bean container feeder catchthe corresponding grooves on the bean container.4. Rotate the bean container clockwise to lock it into place on the grinder.5. Insert the mains plug (14) into a properly installed wall socket.6. Push the spill tray (6) into the corresponding opening under the outlet (7).