Mahlkonig EK 43 Operating Instructions Manual

Also see for EK 43: Operating instructions Original instruction manual Instruction manual Instruction manual

Contents

Mahlkonig EK 43 Operating Instructions Manual Manual pdf 8 page image

L A D E N M Ü H L E N | S H O P G R I N D E RDetermine whether the mains voltage and fre-quency correspond to the information on therating plate.Insert the plug into the available grounded outlet.6. Operation6.1 How to use the grinder1. By moving the rotary knob (pos.3), set the required grind de-gree (to the left for coarse grind, to the right for finer grind).2. Only fill whole coffee beans (unground material) into thehopper (pos.1). Close the hopper.3. Press the handle of the bag holder down (pos.5) and push thecompletely opened bag, which has been smoothed along thefolds, over the spout. Let go of the handle and the bag is heldfirmly in position.4. Now you can switch on the grinder (pos.7).Knock the base of the bag a number of times whilst grinding. Thisallows the maximum capacity of the bag to be used.In the case of the combination grinder, by turn-ing the combined On / Off - selection switch youcan select the grinder you wish to use.You can only grind on the side of the grindercasing side you have selected. You cannot grindon both sides at the same time.5. Once all material has been ground, hold the bottom of thebag gently in one hand. Use the other hand to press the han-dle of the bag holder and allow it to knock against the spout2 – 3 times. This removes any ground particles which maystill be attached to the inside of the spout6. Now switch off the grinder (pos. 8)7. Remove the filled bag from the spout. The grinding process isterminated. Close the main hopper slider.8