Menu
Lenovo smart lock E3 PRO User Manual
         |
2 : ADD USERCAUTIONThe user places his finger on the fingerprint sensor, and when prompted, enters the fingerprintagain, and the user places the same finger on the sensor. The voice prompt "Registration successful".a. To enter a fingerprint, the user needs to record the fingerprint 5 times continuously.b. When collecting fingerprints, try to collect as many times as possible from different locations onthe same finger, so that the subsequent verification of fingerprints is easier to be recognized.2.2 : ADD FINGERPRINT1. Password Managemet2. Fingerprint Management3. Key Card Management4. System SettingsFollow the prompts to select the onesyou want to add Password, fingerprintor key cardPress the [*] [#] key, please use the administrator password for verification. After entering the mainmenu, the user can press the corresponding number key to select the operation according to themenu number.The user enters the password, press the [#] key to confirm, press the [#] key to confirm, and enter thepassword again when prompted, and the user enters the same password. Support the virtual passwordfunction, you can add numbers before and after the correct password at will to achieve passwordinput and verification unlocking (up to 32 digits including virtual password bits during verification,1232.1 : ADD PASSWORDThe user places the card close to the antenna receiving area and the voice prompt "Registrationsuccessful".2.1 : ADD KEY CARD |
Related manuals for Lenovo smart lock E3 PRO
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved