OneStart

Menu
Lenovo s510 User Manual Manual pdf 63 page image

Lenovo s510 User Manual

Also see for S510: User guideHardware Maintenance ManualHardware Maintenance Manual

Page 1 previewPage 2 previewPage 3 previewPage 4 previewPage 5 previewPage 6 previewPage 7 previewPage 8 previewPage 9 previewPage 10 previewPage 11 previewPage 12 previewPage 13 previewPage 14 previewPage 15 previewPage 16 previewPage 17 previewPage 18 previewPage 19 previewPage 20 previewPage 21 previewPage 22 previewPage 23 previewPage 24 previewPage 25 previewPage 26 previewPage 27 previewPage 28 previewPage 29 previewPage 30 previewPage 31 previewPage 32 previewPage 33 previewPage 34 previewPage 35 previewPage 36 previewPage 37 previewPage 38 previewPage 39 previewPage 40 previewPage 41 previewPage 42 previewPage 43 previewPage 44 previewPage 45 previewPage 46 previewPage 47 previewPage 48 previewPage 49 previewPage 50 previewPage 51 previewPage 52 previewPage 53 previewPage 54 previewPage 55 previewPage 56 previewPage 57 previewPage 58 previewPage 59 previewPage 60 previewPage 61 previewPage 62 previewPage 63 previewPage 64 previewPage 65 previewPage 66 previewPage 67 previewPage 68 previewPage 69 previewPage 70 previewPage 71 previewPage 72 previewPage 73 previewPage 74 previewPage 75 previewPage 76 previewPage 77 previewPage 78 previewPage 79 previewPage 80 previewPage 81 previewPage 82 previewPage 83 previewPage 84 previewPage 85 previewPage 86 previewPage 87 previewPage 88 previewPage 89 previewPage 90 preview
Lenovo s510 User Manual Manual pdf 63 page image
To replace the heat sink and fan assembly, do the following:1. Remove any media from the drives and turn off all connected devices and the computer. Then,disconnect all power cords from electrical outlets and disconnect all cables that are connected to thecomputer.2. Remove the computer cover. See “Removing the computer cover” on page 48.3. Locate the heat sink and fan assembly. See “Computer components” on page 5 .4. Disconnect the heat sink and fan assembly cable from the microprocessor fan connector on the systemboard.5. Loosen the four screws that secure the heat sink and fan assembly to the system board in the followingsequence:a. Partially remove screw 1 , fully remove screw 2 , and then fully remove screw 1 .b. Partially remove screw 3 , fully remove screw 4 , and then fully remove screw 3 .Note: Carefully remove the four screws from the system board to avoid any possible damage to thesystem board. The four screws cannot be removed from the heat sink and fan assembly.Figure17. Removing the heat sink and fan assembly6. Lift the failing heat sink and fan assembly off the system board.Notes:• You might have to gently twist the heat sink and fan assembly to free it from the microprocessor.• Do not touch the thermal grease while handling the heat sink and fan assembly.7. Position the new heat sink and fan assembly on the system board so that the four screws are alignedwith the holes in the system board. Ensure that the heat sink and fan assembly cable faces toward themicroprocessor fan connector on the system board.8. Tighten the four screws to secure the new heat sink and fan assembly in the following sequence. Donot over-tighten the screws.a. Partially tighten screw 1 , fully tighten screw 2 , and then fully tighten screw 1 .b. Partially tighten screw 3 , fully tighten screw 4 , and then fully tighten screw 3 .9. Connect the heat sink and fan assembly cable to the microprocessor fan connector on the systemboard. See “Parts on the system board” on page 6 .Chapter 7. Installing or replacing hardware 53
/ 90
Related manuals for Lenovo S510
Lenovo ThinkCentre M83z User Manual first page preview
Lenovo ThinkCentre M83z User Manual
Lenovo s200 Hardware Maintenance Manual first page preview
Lenovo s200 Hardware Maintenance Manual
This manual is suitable for:
S510
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved