Menu
Lenovo ideapad 310 Hardware Maintenance Manual
Also see for ideapad 310: User guideHardware Maintenance Manual
                                                                                                               |
Related service information23This chapter presents the following information:• “Restoring the factory contents by using Recovery Disc Set” on page 23• “Passwords” on page 24• “Power management” on page 25When the hard disk drive or solid state drive is replaced because of a failure, noproduct recovery program is on the new drive. In this case, you must use theRecovery Disc Set for the computer. Order the Recovery Disc Set and the drive atthe same time so that you can recover the new drive with the pre-installedsoftware when they arrive.The Recovery Disc Set consists of the following set of DVDs to restore thecomputer to the original factory configuration.Start Recovery Disc (one disc)This disc is used to format the hard disk drive and initiate the recovery process.Operating System Recovery Disc (one or more discs)This disc restores the Microsoft Windows operating system.Applications and Drivers Recovery Disc (one or more discs)This disc restores the pre-installed applications and drivers on the computer.Supplemental Recovery DiscThis disc contains additional content, such as software for specific models andupdates to the software that was preloaded on the computer. Not all recoverydisc sets come with a Supplemental Recovery Disc.To restore the computer to the original factory configuration using the recoverydisc set, do the following:1. Insert the bootable Start Recovery Disc into the optical drive.2. Start the computer. When the Lenovo logo comes up, immediately press F12;on the boot sequence menu, select the optical drive as the first boot-up device.The computer will boot from the Start Recovery Disc. Follow the on-screeninstructions to begin the recovery process.3. Read the license. If you agree with the terms, select I accept these terms andconditions and then click Next.4. Insert the Operating System Recovery Disc when prompted and click Yes tobegin the operating system recovery process.5. Insert the Applications and Drivers Recovery Disc when prompted and thenclick OK to begin the applications and drivers recovery process.6. If you have a Supplemental Recovery Disc, insert it when prompted and clickYes. If you do not have a Supplemental Recovery Disc, click No.Related service informationRestoring the factory contents by using Recovery Disc Set |
Related manuals for Lenovo ideapad 310
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved