How to install1. Connect the necessary cable, then switch on the drive.Connect the USB cable to the USB connector on the drive.2. Connect the other end of the USB cableto your PC, TV or other devices.Connecting to the PC3. Connection to the TV (or Tablet) is available only if it supports high-powered USB device.Refer to "How to use AV Connectivity" for more information.4. Normal operation is not guaranteed if you use a USB hub or unspecified cables.5. PCs, TVs and other devices with insufficient USB bus power will not work correctlyif you use only one USB port.To avoid this, connect the drive to 2 USB ports.a. Y-Cable (please purchase separately)Connecting to the TV(In AV Connectivity mode)Connecting to the Tablet(In AV Connectivity mode)CautionIf your computer does not have a USB connector, install a USB interface card.6