Lenovo Thinksmart Hub 500 Safety, Warranty, And Setup Manual

Also see for ThinkSmart Hub 500: User guide and hardware maintenance manual Deployment guide Deployment guide

PN: SP40K37039Printed in ChinaFirst Edition (February 2018)© Copyright Lenovo 2018.LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration“GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.Safety, Warranty, and Setup GuideHub 500Accessing the electronic user manualsThis documentation is designed to be used in conjunction with the User Guide and Hardware MaintenanceManual, and the Important Product Information Guide. To access these manuals, do one of the following:• Go to http://www.lenovo.com/support.• Scan the quick response (QR) code on the last page of this manual.UnpackInitial setup instructions1. Open the cable management door.2. Connect devices to the appropriate connectors on the meeting console.3. Connect the power adapter connector to an electrical outlet.4. Insert the cables into the corresponding notches, and then close the clips to secure the cables.5. Close and lock the cable management door.