ThinkSystem SR860Setup GuideMachine Type: 7X69 and 7X70

Lenovo ThinkSystem SR860 Setup Manual

Chapter 1. Introduction

Features

specifications

Management options

Chapter 2. Server components

front view

front operator panel

Front operator panel with LCD display

rear view

Optional processor and memory expansion tray

pcie riser cards

inch drive backplanes

RAID adapters

internal cable routing

Cable routing for 2.5-inch drives to one backplane

Cable routing for 2.5-inch drives to two backplanes

parts list

power cords

Chapter 3. Server hardware setup

installation guidelines

system reliability guidelines

remove the security bezel

remove the top cover

Remove a 4U PCIe riser assembly

Remove the PCIe expansion tray

Remove the chassis air baffle

Remove the system board air baffle and the power interposer

Remove the processor and memory expansion tray

Remove the fan cage assembly

Install a processor-heat-sink module

Install a memory module

Install a drive backplane

Install a 2.5-inch hot-swap drive

Install the fan cage assembly

Install the system board air baffle and the power interposer

Install the processor and memory expansion tray

Install the PCIe riser card assembly

Install the LOM adapter

How to adjust the position of the retainer on the M.2 backplane

Install an M.2 drive in the M.2 backplane

Install the M.2 backplane

Install the chassis air baffle

Install a 4U PCIe riser assembly

install the top cover

install the security bezel

install the server in a rack

power off the server

Chapter 4. System configuration

update the firmware

Configure the firmware

memory configuration

Install the operating system

Chapter 5. Resolving installation issues

before you call

Collecting service data

contacting support

Index

7X69

7X70

ThinkSystem SR860

Lenovo ThinkSystem SR860 Setup Manual

Product

Learn More

Legal