AC power cords 151AC power cordsIMPORTANT: The plug and the complete power cable assembly must meet the standards appropriate to thecountry, and must have safety approvals acceptable in that country.Recycling of Waste Electrical and Electronic Equipment (WEEE)At the end of the product’s life, all scrap/waste electrical and electronic equipment should be recycled inaccordance with national regulations applicable to the handling of hazardous/toxic electrical and electronic wastematerials.Please contact your supplier/Lenovo for a copy of the Recycling Procedures applicable to your country.IMPORTANT: Observe all applicable safety precautions detailed in the preceding chapters (weight restrictions,handling batteries and lasers, etc.) when dismantling and disposing of this equipment.Radiated emissions limit levels CFR47 Part 15B Class AEN55022 Class ACISPR Class AHarmonics and flicker EN61000-3-2/3Immunity limit levels EN55024Table 36 EMC compliance specifications (continued)Table 37 AC power cord specifications1 United States of America–Must be NRTL Listed (National Recognized Test Laboratory – e.g., UL):Chassis form factor 2U12/2U24 5U84Cord type SV or SVT, 18 AWG minimum, 3conductor, 2.0M max lengthSJT or SVT, 12 AWG minimum, 3conductorPlug (AC source) NEMA 5–15P grounding-typeattachment plug rated 120V 10AIEC 320 C-20, 250V, 20Aor orIEC 320, C-14, 250V, 10A A suitable plug rated 250V, 20ASocket IEC 320, C-13, 250V, 10A IEC 320, C-19, 250V, 20A2 Europe and others–General requirements:Chassis form factor 2U12/2U24 5U84Cord type Harmonized, H05-WF-3G1.0 Harmonized, H05-WF-3G2.5Plug (AC source) IEC 320 C-20, 250V, 16AorA suitable plug rated 250V, 16ASocket IEC 320, C-13, 250V, 10A IEC 320, C-19, 250V, 16A