• Burn a disc using Windows Media® Player.1. Insert a recordable disc into the optical drive that supports recording.2. Open Windows Media Player. See “Accessing a program on your computer” on page 41.3. Follow the instructions on the screen.• Burn a disc from an ISO file.1. Insert a recordable disc into the optical drive that supports recording.2. Double-click the ISO file.3. Follow the instructions on the screen.Recording a disc using preinstalled programsTo record a disc using preinstalled programs, do the following:1. Insert a recordable disc into the optical drive that supports recording.2. Open the PowerDVD Create, PowerProducer, or Power2Go program. See “Accessing a program onyour computer” on page 41.3. Follow the instructions on the screen.Connecting to a networkThis section provides information about connecting to a network. If you cannot connect your computer to anetwork, see “Ethernet LAN problems” on page 78.Connecting to an Ethernet LANYou can connect your computer to an Ethernet LAN by connecting an Ethernet cable to the Ethernetconnector.DANGERTo avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet connector.Connecting to a wireless LANYou can connect your computer to a wireless LAN without the use of an Ethernet cable but by means ofradio waves only.Note: The wireless LAN feature is available only on some models.To establish a wireless-LAN connection, do the following:1. Ensure that a wireless LAN is available and the wireless LAN feature on your computer is working.2. Click the wireless-network-connection-status icon in the Windows notification area to display availablewireless networks.Note: If the wireless-network-connection-status icon is not displayed in the Windows notification area,add the icon to the notification area. See the Windows help system.3. Click a wireless LAN, and then click Connect to connect your computer to it. Provide requiredinformation if needed.Chapter 3. Using your computer 47
