Menu
Lenovo ThinkStation P360 Tiny User Manual
Also see for ThinkStation P360 Tower: User guideHardware Maintenance ManualHardware Maintenance ManualQuick start guide
                                                                |
If both the power-on password and supervisor password are set, you can enter either password.However, you must use your supervisor password to change any configuration settings.• Hard disk passwordSetting a hard disk password prevents unauthorized access to the data on the storage drive. When a harddisk password is set, you are prompted to enter a valid password each time you try to access the storagedrive.Note: After you set a hard disk password, your data on the storage drive is protected even if the storagedrive is removed from one computer and installed in another.• System management password (for selected models)You can enable the system management password to have the same authority as the supervisorpassword to control security related features. To customize the authority of the system managementpassword through the UEFI BIOS menu:1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.2. Select Security ➙ System Management Password Access Control.3. Follow the on-screen instructions.If you have set both the supervisor password and the system management password, the supervisorpassword overrides the system management password.Set, change, and remove a passwordBefore you start, print these instructions.1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.2. Select Security.3. Depending on the password type, select Set Supervisor Password, Set Power-On Password, SetSystem Management Password, or Hard Disk Password and press Enter.4. Follow the on-screen instructions to set, change, or remove a password.5. Press F10 or Fn+F10 to save the changes and exit.You should record your passwords and store them in a safe place. If you forget the passwords, contact aLenovo-authorized service provider to have the passwords removed.Note: If the hard disk password is forgotten, Lenovo cannot remove the password or recover data from thestorage drive.Certificate based BIOS managementCertificate-based BIOS authentication (also called the password-less management mode) provides moresecure UEFI BIOS management with password-free solution. It is used to replace the supervisor password /system management password for authentication if you have set one.Note: Supervisor password / system management password are disabled automatically when certificatemode is enabled. But the power-on password / hard disk password still can be used normally in certificatemode if you have set one.For certificate enrollment, see Certificate Enrollment Guide at: https://support.lenovo.com/docs/certificate_enrollment_guideEnter the BIOS menu with certificateOnce you have enrolled the certificate, you can enter the BIOS menu with the certificate.1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1 to enter the BIOS menu.12 P360 Tiny User Guide |
Related manuals for Lenovo ThinkStation P360 Tower
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved