Menu
Lenovo ThinkServer LPe12000 Installation Manual
                      | |
LPe12000, LPe12002 and LPe12004 Hardware Installation Manual Page 5Attaching MediaUse multi-mode fiber optic cable with short-wave SFP+ transceiver, use singe-mode fiber optic cablewith long-wave SFP+ transceiver, that adheres to the following specifications:Note: The HBA will not allow normal data transmission on an optical link unless it isconnected to another similar or compatible laser product (that is, multimode tomultimode.)Note: The HBA will not automatically downgrade to the required FC speed based on cablelength. You must downgrade the speed with the appropriate utility or link errors mayoccur.Table 5. Media SpecificationsFiber Optic Cable Maximum Length Minimum Length ConnectorOM3 - Multimode 50/125micron fiber (2000 MHz*kmbandwidth cable)2.125Gbps: 0.5m - 500m4.25Gbps: 0.5m - 380m8.5Gb/s 0.5m – 150m.5 meters LCOM2 - Multimode 50/125micron fiber (500 MHz*kmbandwidth cable)2.125Gb/s: 0.5m – 300m4.25Gb/s: 0.5m – 150m8.5Gb/s 0.5m – 50m.5 meters LCOM1 - Multimode 62.5/125micron fiber (200 MHz*kmbandwidth cable)2.125Gb/s: 0.5m – 150m4.25Gb/s: 0.5m – 70m8.5Gb/s 0.5m – 21m.5 meters LCOS1/OS2 – Single-mode 9micrometer fiber with LCconnectors2.125Gb/s: 0.5m – 10 km4.25Gb/s: 0.5m – 10 km8.5Gb/s 0.5m – 10 km.5 meters LC |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved