Advanced Port Replicator will be undocked, leaving the computer and theUltraBase unit still connected by Windows Me.Tips for docking station support on ThinkPad models 600, 600E and 600X:• If you dock your ThinkPad to a SelectaDock-II or SelecaDock-III docking station, the“Crystal SoundFusion™ Game Port” or “Gameport Joystick” device will be marked witha yellow exclamation point in the Device Manager menu. Windows Me does this bydesign, because there is only one game port resource available to the system. When thecomputer is docked, the system BIOS configures this resource to the game port devicelocated on the docking station rather than the one on the system-unit. Disable the“Crystal SoundFusion™ Game Port” at Device Manager to avoid the resource conflict.You can still attach a game port device to the docking station.Tips for docking station support on ThinkPad models A20m, A20p, T20 and X20:• Prior to performing any kind of docking, it is required to install the latest CMD UltraDMA IDE driver for DOS, Win95/98/NT4/2K. For more information, please refer toreadme file that comes with the driver.Hot and Warm swapping support for supported ThinkPad modelsWindows Me is full Plug and play support for devices located in the UltraBay FX, UltraslimBayor Ultrabay 2000 slot of your ThinkPad computer. Such devices include the following:o LS-120 Super Disk driveo ZIP 100 driveo IDE CD-ROM, CD-RW and DVD-ROM driveo Secondary battery packo Diskette driveEach device can be dynamically inserted and removed from the swappable bay slot withouthaving to completely turn off the computer. Depending on your type of ThinkPad computer,Windows Me supports two types of swapping: Hot and Warm.Warm swapping:Under Windows Me, you can perform warm swap while the computer is in Standbymode.Hot swapping:Under Windows Me, you can perform a hot swap while the computer is “running”. Youcan remove or insert a device from the swappable bay without turning off or placing thecomputer into Standby. The user can safely swap in and out different devices from theswappable bay slot.UltraBay FX device swapping with ThinkPad models 390, 390E and 390X:• ThinkPad 390 series support only warm swapping under the Windows Me. To enable thisfeature, you must install the latest Swap Master Driver.