Lenovo ThinkPad WMTB-177N User Manual

6 HDMI connectorThe HDMI connector is used to connect an external HDMI monitor to the wireless display adapter usingan HDMI cable.7 Headset connectorThe headset connector is used to connect a headset or a speaker.8 VGA-out connectorThe VGA-out connector is used to connect an external VGA monitor to the wireless display adapter using aVGA cable.Note: The HDMI connector and the VGA-out connector cannot be used at the same time. If both of them areconnected, only the VGA-out connector functions.9 VGA-in connectorThe VGA-in connector is used to connect your notebook computer to the wireless display adapter usinga VGA cable. You can connect your notebook computer to the wireless display adapter either throughwireless connection or using the VGA-in connector.Note: It is not recommended that you use both the wireless connection and the VGA-in connector withmultiple notebook computers at the same time. Otherwise only the screen of the notebook computer that isconnected to the VGA-in connector will be displayed on the monitor.10 Hang slotThe hang slots are used to hang the wireless display adapter on the wall with two screws.Note: The screws are not included in your option package. If necessary, purchase two screws.11 Emergency reset holeIf the wireless display adapter does not respond, restart the wireless display adapter by inserting astraightened paper clip into the emergency reset hole.12 Machine type and model labelThe machine type and model label identifies your wireless display adapter. When you contact Lenovo forhelp, the machine type and model information helps support technicians identify your wireless displayadapter and provide faster service.System requirementsBefore installing the wireless display adapter, ensure that your notebook computer has one of the followingoperating systems installed:• Microsoft® Windows® 7 (32-bit or 64-bit)• Microsoft Windows 8 (32-bit or 64-bit)• Microsoft Windows 8.1 (32-bit or 64-bit)Chapter 1. About the wireless display adapter 3