Menu
Lenovo T1 User Manual
Also see for T1: Quick start guide
                            |
machine by other causes, press and hold the buttonthe mopping module and press to continue working.If the machine needs to add water or clean the mop duringcleaning, please press the power button to pause before removingthe mopping module. After adding water or cleaning mop, re-installPartial cleaningWhen the machine is on standby or pause, press the partialcleaning button to start partial cleaning. This mode can cleana 1.6m x 1.6m square area taking the machine as the center.After the cleaning, the machine will automatically return to thestarting position and stop working.Note: Starting partial cleaning when in pause will end the lastcleaning and start a new cleaning task.Adding water in the water tank or cleaning mopduring cleaningFault conditionWhen abnormality occurs in the operation of the machine, thepower button indicator flashes orange and voice prompt sounds.For solutions, please refer to page 20, "Troubleshooting".Note: After 10 minutes under the fault condition without operation,the machine will automatically sleep.Sleep modeIf there is no operation for more than 20 minutes, the machinewill enter sleep mode automatically. In the sleep mode, afterthe breathing light turns out, the machine can be activated bypressing any button.Note:The machine will not enter sleep mode when charging onthe charging base.When it turns low battery during sleep mode, the machinewill automatically shut downReset WiFiWhen the configuration of router is changed, passwordforgotten or the mobile phone fails to connect to theand button until the voice prompt "Reset WiFi" appears,and then reset the WiFi connection referring to the relevantsteps of the WiFi network configuration in the quick setupinstructions.InstructionsWhole house cleaningClick on the whole house cleaning in the mobile phoneapplication, the machine will perform the whole housecleaning.Room cleaningClick on the room cleaning in the mobile phoneapplication, add and set rooms, then select the roomand execute cleaning.Fixed location cleaningSelect target location in the mobile phone application, themachine will automatically plan the route and get to theselected location.Set up zoning cleaning function in the mobile phoneapplication, the machine will clean the area designatedon the mobile phone.Zoning cleaningThe default mode is standard mode. Quiet mode, automaticmode, powerful mode and mop-only mode are optional onthe mobile client.Standard mode |
Related manuals for Lenovo T1
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved