Lenovo ScrollPoint Pro Mouse User Manual

Also see for ThinkPad Hard Disk Drive: User guide User manual Hardware Maintenance Manual User guide User guide

Chapter 4. ThinkPad USB Travel MouseThis chapter contains installation, usage, and maintenance information for the ThinkPad USB TravelMouse.Product DescriptionThe ThinkPad USB Travel Mouse includes a ScrollWheel to control scrolling and other functions. Themouse includes a PS/2 and USB connector and can be connected to any enabled USB port.The mouse works with computers that use the following operating systems:v Windows 2000 Professionalv Windows XPv Windows Vistav Operating systems that support USB connectivityv PS/2 ports on computers using the Windows NT Workstation operating system.This package contains:v One ThinkPad USB Travel Mousev One CD-ROM containing installation software and an online User’s Manualv One USB to PS/2 adapterInstalling the Mouse Suite SoftwareIncluded in your package is a CD-ROM containing installation software for the mouse. To install theMouse Suite Software, complete the following procedure:1. Turn on the computer and start the operating system.2. Insert the Device Driver CD into your CD-ROM drive. Click the Driver arrow. Follow the on-screeninstructions on your screen. If the Setup program does not open, go to Steps 3. If the setup programopens, go to Step 6.3. Click Start.4. Click Run.5. In the command line, type X:\setup where X is the drive letter for your CD-ROM drive.6. Click OK.7. Follow the on-screen instructions to complete the Mouse Suite Software installation.Note: When you are prompted, click PS/2 if you will be connecting the mouse to the standard mouseconnector or click USB if you will be using the mouse with a USB connector.Installing the MouseThis section contains information for installing the mouse in PS/2 mode and in USB mode.If a PS/2 mouse is plugged into your computer, you must first turn off your computer prior to removingthis mouse. Plug in your mouse and restart your computer. If message displays indicating that you donot have a PS/2 mouse connected, ignore the message and continue.Installing the mouse in PS/2 modeTo install the mouse using the Windows NT operating system, do the following:1. Turn off your computer.© Lenovo 2005, 2008. Portions © IBM Corp. 2005. 4-1