6. Push the power switch on the mouse to the on position and the LED indicator is on.Figure8. Turning on the power switchNotes:• The green LED indicates that the mouse is ready for use.• The flashing red LED indicates a low battery power level.• Push the power switch on the mouse to the off position when you are not using the mouse. This extendsthe battery life.Storing the dongleWhen you are not using the mouse, store the dongle in the battery compartment of the mouse as shown:Figure9. Storing the dongle in the mouse battery compartmentTroubleshootingThis topic provides basic troubleshooting information when you encounter problems with your mouse.Problem: The mouse pointer cannot move.Solution: To solve the problem, do the following:• Ensure that you have followed all installation procedures.• Reinstall the Lenovo Mouse Suite software.• Clean the mouse lens with a soft cotton swab. Do not use any other liquid or solvent to clean the mouselens as this might cause damage to the lens.Chapter 3. Lenovo Laser Wireless Mouse 15