Micro-SIMmicroSDMicro-SIM1Micro-SIM2Step 3. Carefully insert the card tray with the installedcards back into the slot.Install the Micro-SIM and the microSD cards as shown.Preparing your deviceStep 1. Insert the eject tool that comes with your deviceinto the hole in the card tray.Step 2.Insert the Micro-SIM and microSD cardsinto the corresponding card slot.Insert the Micro-SIM1 and Micro-SIM2cards into the corresponding card slot.Pull out the card tray and do one of the following:Only Micro-SIM cards work with your device.Only microSD cards formated with FAT32 work with your device. You might needto format your microSD card before using by following the instructions on thescreenDo not insert or remove the Micro-SIM card while your device is on. Doing so canpermanently damage your Micro-SIM card or device.2