Menu
Lenovo M820 Quick Start Manual
            |
Problem: The Check Print Cartridge message lights up after you insertprint cartridges.Remove print cartridges. Make sure you remove all tape fromcopper contacts. Close the door. Refer to Step 9.Problem:Problem:Problem:Problem:Action:Action:Action:Action:Action:Paper jammed during print alignment.Turn off the device and remove the back door. Gently removeany paper. Turn the device on and carefully insert the paper.Refer to Step 5.You did not see the screen telling you when to connect the USBcable.Remove, and then re-insert the Lenovo MFP Windows CD.Refer to Step 14.The Windows Microsoft Add Hardware screen appears.Click Cancel. Unplug the USB cable, and then insert theLenovo MFP Windows CD. Refer to Steps 14 and 15.The Device Setup Has Failed To Complete screen appears.Verify that the control-panel overlay is firmly attached. Unplug theLenovo MFP and plug it in again. Check all connections. Makesure the USB cable is plugged into the computer. Do not plug theUSB cable into a keyboard or non-powered hub. Refer to Steps4 and 15.© Copyright 2004 Lenovo (Beijing) limited Printed in Singapore or Malaysia.Refer to the User Manual or Photo and Imaging help for more information.Visit www.Lenovo.com.Troubleshooting |
Related manuals for Lenovo M820
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved