Menu
Lenovo Legion Go User Manual
Also see for 83E1: User guide
                              |
The controllers may be powered off in three situations.• In the pairing mode, the controllers will be automatically shut down if there is no successful connectionwithin two minutes.• Ten minutes of no operation when the controllers have been connected to the external device.• Press and hold the Home key for three seconds.Reset the controllersQuickly press the pin hole on the back of the controller, it will be forced to power off.Note: The temporary data in the Memory will be cleared after the controller is powered off.Switch between connection modesBefore starting the game travel, you should switch Legion Go to the selected mode and then connect it to theright external devices.Follow the operation guide and check whether you have switched to the correct mode according to theindicator status.The indicator is embedded in the power button.Table 1. Operation guide to switching between different connection modesMode Operation Indicator statusPC mode Press X button → Hold Home button for 2 seconds →Connect to an external deviceSolid greenSwitch mode Press Y button → Hold Home button for 2 seconds →Connect to an external deviceSolid redAndroid mode Press A button → Hold Home button for 2 seconds →Connect to an external deviceSolid blueiOS mode Press B button → Hold Home button for 2 seconds →Connect to an external deviceSolid purpleNotes:• The mode should be switched under power-off state.• Under PC mode and Android mode, Legion Go is in X-input mode by default.• While in X-input mode, press Home, A, and B button at the same time, your console can be switched to D-input mode and the indicator blinks twice means the mode switch is successful.• While in D-input mode, press Home, A, and B button at the same time, your console can be switched to X-input mode and the indicator blinks once means the mode switch is successful.Set the Turbo combo keysCombo keys provides a shortcut in playing games, which can help make faster actions and save your efforts.When you have set the combo keys, you can just press one key to realize the effect of pressing several keys.Set the Turbo combo keys: Hold the Turbo key, and fast press the key (A/B/X/Y/L1/L2/R1/R2), then thecombo key has been remembered by Legion Go.There are four gears for the speed of the combo keys: off (default) / slow (2Hz) / medium (5Hz) / fast (8Hz).10 User Guide |
Related manuals for Lenovo 83E1
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved