Chapter 1. 1-67. Insert the power cord into the monitor, then plug the monitor power cord and thecomputer cord into grounded electrical outlets.Note: A certified power supply cord has to be used with this equipment. The relevant nationalinstallation and or equipment regulations shall be considered. A certified power supply cordnot lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designationH05VV-F 3G 0.75mm2 or H05VVH2-F2 3G0.75mm2) shall be used. Alternative a flexiblecord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm2) shallbe used.8. Power on the monitor and the computer.