Chapter 1. 1-5Place the cable into the specific hook indicated in below figure.Note: A certified power supply cord has to be used with this equipment. Therelevant national installation and/or equipment regulations shall be considered. Acertified power supply cord not lighter than ordinary polyvinyl chloride flexiblecord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F23G0.75mm2) shall be used. Alternative a flexible cord be of synthetic rubber accordingto IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used.Side view after all cables have been placed.Insert the power cord into the monitor ,then plug the monitor power cord and thecomputer cord into grounded electrical outlets.4.5.