Menu
Lenovo IdeaCentre K210 Installation Manual
Also see for IdeaCentre K210: Safety and Warranty GuideReference guideReference guideUpgrade instructionsSpecifications
 |
To install Lenovo Bright Eye camera, do the following:123 54[J1](2)(1)S-1S-2S-3S-4S-5Installation Guide for Lenovo Bright Eye Camera (This camera can also be used as a common camera)J1- Four securing latches on the front side of thecamera baseThere are four securing latches on the front sideof the camera base. Align the four latches to thefour slots on the top of computer display.Embed the four securing latches of the camerabase into the four slots, and then push the casedownward until it is locked. After that, thecamera base is secured onto the display.Move the camera with the camera bracketinto the base along the glide rail of the baseto install the camera.If the camera is not in use, turn it leftwardor rightward to hide it.S-1 Lens roller —— used to adjust the pitchangle of the lensS-2 Power LED —— used to indicate whenthe computer is powered onS-3 Lens of the cameraS-4 Camera bracketS-5 USB cable —— used to connect thecamera to the computerNote:Press “Push” to move the camera upwardand eject the lens to start the camera.Press “Push” again to move the cameradownward and hide the lens to shut downthe camera.31032935Bright Eye-test.indd 1 2007.12.27 9:45:03 AM |
Related manuals for Lenovo IdeaCentre K210
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved