Lenovo C500 User Manual

Also see for C500: User guide

Contents

Chapter 5. On-screen Display menu controlsThis projector has an On-screen Display that lets you make image adjustments and change varioussettings.Note: You must have a display on the screen in order to access the On-screen Display.Navigating the On-screen DisplayYou can use the remote control or the buttons on the top of the projector to navigate and make changesto the On-screen Display. The following sections show the menus in the On-screen Display.BlankBlankPowerMenuKeystoneAutoEnterSourceVolume MuteFreeze1 21233 2 5 6 4 1654POWERSOURCEAUTOMENUPOWERREADY POWERSOURCEAUTOMENU1 Menu Opens and closes the On-screen Display.2 Left cursor Navigates and changes settings in the On-screen Display menus.3 Down cursor Navigates and changes settings in the On-screen Display menus.4 Right cursor Navigates and changes settings in the On-screen Display menus.5 Up cursor Navigates and changes settings in the On-screen Display menus.6 Enter Changes On-screen Display settings.To access the On-screen Display menus, do the following:1. To open the On-screen Display, press the Menu button.2. There are six menus. Press the left or right cursor buttons to move though the menus.3. Press the up or down cursor button to move up and down in a menu.4. Press the left or right cursor button to change values for settings.5. Press the up or down cursor button to select a different sub-menu item for change.6. If you wish to cancel all changes made within a sub-menu, select Cancel and press the Enter button.7. Press Menu to confirm the new setting and leave the sub-menu, or to close the On-screen Displayfrom the main menu screen.© Lenovo 2006. Portions © IBM Corp. 2005. 5-1