Lenovo 415711U - THINKSTATION S20 TWR W3520 2.8G User Manual

Also see for 4157 - ThinkStation S20 - 2 GB RAM: Hardware Maintenance Manual User guide User guide Hardware Maintenance Manual Safety and Warranty Guide

Contents

6. From the Create array menu, select RAID level and press Enter.Note: Only the valid RAID levels will be active.7. Select the SAS RAID level you want (RAID 0, RAID 1, or RAID 5) and pressEnter.8. From the Stripe size menu, you can change the stripe size or keep it asdefault.9. Type a proper array name in the Array name field.10. Select Next and press Enter. When prompted, press Y to complete the arraycreation and RAID configuration.Configuring the Marvell BIOS Setup to set an optional hotspare hard disk driveTo configure the Marvell BIOS Setup to set an optional hot spare hard disk drive:1. Turn on your computer and press Ctrl+M when prompted to enter the MarvellBIOS Setup.2. On the Marvell BIOS Setup screen, use the arrow keys to select RAID Configand press Enter. The RAID Config menu opens.3. From the RAID Config menu, select Spare Management.4. Use the arrow keys to select the hard disk drive you want to set as an optionalhot spare hard disk drive.5. Use the arrow keys to select Next and press Enter.6. Press Y when prompted to set the optional hot spare hard disk drive.Configuring the Marvell BIOS Setup to delete an optional hotspare hard disk driveTo configure the Marvell BIOS Setup to delete an optional hot spare hard diskdrive:1. Turn on your computer and press Ctrl+M when prompted to enter the MarvellBIOS Setup.2. On the Marvell BIOS Setup screen, use the arrow keys to select RAID Configand press Enter. The RAID Config menu opens.3. From the RAID Config menu, select Spare Management.4. Use the arrow keys to select the optional hot spare hard disk drive you want todelete.5. Use the arrow keys to select Next and press Enter.6. Press Y when prompted to delete the optional hot spare hard disk drive.Configuring the Marvell BIOS Setup to delete an arrayTo configure the Marvell BIOS Setup to delete an array:1. Turn on your computer and press Ctrl+M when prompted to enter the MarvellBIOS Setup.2. On the Marvell BIOS Setup screen, use the arrow keys to select RAID Configand press Enter. The RAID Config menu opens.3. From the RAID Config menu, select Delete array.4. Use the arrow keys and the Enter key to select the array you want to deletefrom the list.5. Use the arrow keys to select Next and press Enter.28 User Guide