Lenovo 104614U User Manual

Contents

Make SMTP SettingThis page is used to set the source address for sending SMTP e-mail.Step 1. Enter the IP address for the SMTP mail server.Step 2. Click Save.User managementThe User List page lists all users including configured users, with network permission. The options includedin this page are used to configure the IPMI users for servers and their permissions.To add a new user, select a blank row from list and click Add User.To modify a user, select this user from list and click Modify User to modify the relevant settings.To delete a user, select this user from list and click Delete User.Note: The user lenovo and three can not be modified or deleted.BMC sensor settingsIn this page, you can select Direct monitoring on I2C bus to monitor BMC sensor mode directly fromI2C bus and get the BMC sensor address, or select External BMC monitoring to manually set the BMCI2C bus address.Note: It is recommended that users should not modify BMC sensor settings.Date/Time and NTP Server SettingThis page can be used to set the internal real-time clock of Remote Management Module. You can manuallyadjust the clock or use the NTP clock server to set the internal clock of Remote Management Module inaccordance with the system clock. Once the Remote Management Module powers down, you need to resetthe clock. To avoid this problem, you can automatically set the internal clock to a NTP time server ofthe current UTC time.Note: The NTP server configuration will be blank if IP auto configuration is configured through either BOOTPor DHCP in the Network settings, because the BOOTP or DHCP server does not provide the NTP serverinformation.Configure SSL UploadThis SSL Upload page can be used to upload SSL certificate and private key in order to get access tothe device in safe mode.Step 1. Select the required SSL certificate and click the Upload button.Step 2. Then you will be prompted to confirm the certificate uploading. The system will give you noticeafter the success of uploading the certificate. After the SSL certificate is successfully uploaded,you will be prompted to reboot the system.Remote ControlThe Remote Control page allows you to execute the following remote operation on the server:• Console Redirection• Server Power Control18 ThinkServer RD230 and RD240 Remote Management User Guide