Applying labels to the base coverThe new base cover FRU is shipped with a kit containing labels of several kinds. When you replace thebase cover, you need to apply the following labels:If the Windows Certificate of Authentication label (COA) 2 is attached to a part that is replaced, return theold part with the label attached to the customer, or provide a letter to the customer stating what the labelwas originally on the system and what the label part number, serial number, and product key were.4 Information label under battery8 FCC label9 Homologation label14 Serial number blank labelFollowing labels need to be peeled off from the old base cover, and need to be put on the new base cover.1 Ethernet label3 SID card label5 SIM ICCID label6 China Mobile label/China Telecom label7 Non Encryption label/Indonesia rating label10 Brazil ANATEL label11 Israel homologation label12 Malaysia SIRIM label13 Indonesia Postel label15 Wireless WAN label16 Wireless LAN labelFor some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one ortwo FCC labels, find duplicates of them in the label kit and apply them to the new base cover.Chapter 8. Removing and replacing a FRU 81
