LaserLine CrossDot-Laser 5P Manual

Contents

safety instructions

LaserLine CrossDot-Laser 5P Manual Manual pdf 8 page image

08Completely read through the operating instructions, the „Warranty and Additional Information“booklet as well as the latest information under the internet link at the end of these instructions.Follow the instructions they contain.This document must be kept in a safe place and if the laserdevice is passed on, this document must be passed on with it.!Function / ApplicationAutomatic cross-line and 5-point laser for vertical and horizontal alignment– The slope-mode feature is an extra that permits gradients to be laid out.– Individually switchable laser lines– The 5 laser points are arranged each offset by 90° on the horizontal and vertical planes of the laser lines.3 points of intersection, consisting of a laser line and point, are formed at the end of the laser lines.– The plum and ceiling points allow markings to be easily transferred from the floor to the ceiling.– Out-Of-Level: is indicated by optical signals when the unit is outside its self-levelling range.– With the 360° magnetic base the device can be used individually or in combination –on walls and attached to magnetic objects– Automatic levelling range 4°, Accuracy 0,2 mm / mGeneral safety instructionsSafety instructionsUsing class 2 lasers– The device must only be used in accordance with its intendedpurpose and within the scopeof the specifications.– The measuring tools and accessories are not toys. Keep out of reach of children.– Modifications or changes to the device are not permitted, this will otherwise invalidate the approvaland safety specifications.– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.– The device must no longer be used if one or more of its functions fail or the battery charge is weak.Laser radiation!Do not stare into the beam!Class 2 laser< 1 mW · 635 nmEN 60825-1:2014– Attention: Do not look into the direct or reflected beam.– Do not point the laser beam towards persons.– If a person‘s eyes are exposed to class 2 laser radiation, they should shut their eyes andimmediately move away from the beam.– Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)be used to look at the laser beam or reflections.– Do not use the laser at eye level (1.40…1.90 m)– Reflective, specular or shiny surfaces must be covered whilst laser devices are in operation.– In public areas shield off the laser beam with barriers and partitions wherever possibleand identify the laser area with warning signs.EN