Menu
Larzep CN0024 Instruction Manual
      | |
Contents | 
2Instruction ManualNut-Splitter “CN0024”INDEX1. BEFORE USING THE EQUIPMENT --------------------------------------- 22. TECHNICAL FEATURES ---------------------------------------------------- 23. ESSENTIAL SAFETY REQUIREMENTS ----------------------------------- 34. START-UP -------------------------------------------------------------------- 35. MAINTENANCE ------------------------------------------------------------- 36. WARRANTY ------------------------------------------------------------------ 37. DECLARATION OF CONFORMITY --------------------------------------- 4ANNEXGENERAL DRAWING1. BEFORE USING THE EQUIPMENTRemove the tool from its packaging and check for external damage, such as:o a broken cutting blade.o a damaged levers.o a loosed/unscrewed parts.LARZEP hydraulic tools are designed in accordance with internal quality standards, in compliance with the ISO 9001 regulation.The tools are designed for the applications described in this manual. Any other use may pose a risk to the equipment and result in hazardous situations for theoperator.The manufacturer accepts no responsibility for damage resulting from the improper use of the tool.Check that the machine and accessories have not been damaged in any way during transportation to the plant. Always use the tools in well-lit areas.The operator should be fully aware of the risks inherent in the use of high-pressure hydraulic tools, and should act responsibility in accordance with that describedin this manual, ensuring both his/her own safety as well as the safety of others located in the vicinity of the working zone.The working instructions should be available for consultation by the operator at all times.In addition to reading and understanding the instructions manual, the operator should be trained in the use of the machine and in the standards and regulationsgoverning operations of this kind, such as those pertaining to accident prevention and environmental protection, for example. All exposed personnel should useappropriate personal protection equipment: boots, helmet, goggles, gloves and protective clothing.Boots Helmet Goggles Gloves Clothes2. TECHNICAL FEATURESThe tools in the CN cable cutter range are designed to cut cables and bars in accordance with the specifications contained in the table below. Any other use notincluded in the said specifications may cause irreparable damage to the cutter and render it unable to carry out the task for which it was designed.When using the cable cutter, the operator should take steps to prevent the cable from fraying. We recommend that, before commencing the cutting operation,the cable be attached to either end of the cutting zone, using tape, wire or another similar means.MODELS CN0024 CN0224 CN0324 CN0233 CN0152 CN0180CAPACITY kN 135kN 135 kN 135 kN 345 kN 437 kN 1134 kNMAXIMUM SPLITTING CAPACITYDEPENDING ON THE NUT QUALITY12 / 98 / 85 / 6M24 7/8”M24 1”M24 1”-M24 7/8“M24 7/8“-M24 7/8“M24 7/8“M36 1 3/8“M36 1 3/8“M36 1 3/8“M52 2“M52 2“M52 2“M80 3“M80 3“M80 3“MINIMUM NUT DIMENSION M 12 ½” M 12 ½” M16 5/8” M25 1” M36 1 ½” M72 2 ¾”REFERENCE BLADE CRN24 CRN0224 CRN0324 CRN0233 CRN33-52 CRN0180DIMENSIONS A mmB mmC mmD mmE mmF mmG mm68 mm471 mm12,5 mm51,5 mm-108 mm48 mm65 mm207 mm12 mm30,3 mm-56 mm40 mm87 mm296 mm22 mm24 mm68,5 mm62 mm38 mm106 mm270 mm24 mm55 mm-84 mm59 mm130,5 mm368 mm17 mm55 mm120 mm136,5 mm83 mm185 mm435 mm37 mm90 mm200 mm202,5 mm120 mmWEIGHT kg 4,3 kg 3,7 kg 5 kg 12,3 kg 13 kg 40 kgDo not loose instruction manual.Never use hydraulic equipment that is damaged or suspected to be in poor condition. |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved