Menu
Lance Lab TC 1 Standard Quick Start Manual
  |
Quick Start Guide: TC 1 Standard1 m Snake CameraTMReference Description1 Power Button / Camera Button2 Video Record Button3 Rewind Button (menu back)4 Fast Forward Button (menu forward)5 ESC Button6 Ok/ Enter Button7 Micro SD® Card Slot8 Speaker (Not in use with TC 1)9 Microphone (Not supplied with TC 1)10 Video Feed Connector (AV/ in)11 Charging Indicator12 System Status Indicator13 AV Output (AV/ out)14 USB Port15 Mode Switch (“Q” standby / “N” On)Mini DVR ControlsTop ViewFront ViewSide ViewLCD DisplayTo turn on Mini DVR, ensure the mode switch (standby) is setto position “N”, the power button must be then be held for 10seconds until the blue light illuminates and the screen turns on.TC 1 Lance Assembly GuideLance Lab Ltd™ ∙ C2 Strangford Business Park ∙ Ards Business CentreJubilee Road ∙ Newtownards ∙ County Down ∙ BT23 4YH ∙ United Kingdom (15.05.15)TC 1 Mini DVR Setup GuideTo begin a recording simply press therecord button on the Mini DVR when the livevideo feed can be seen. Press ESC to endthe recording. To take a photograph simplypress the power button once (allow 5 secondsbetween photo’s).Further guidance on using the MiniDVR system correctly is provided in theTC 1 operating manual and online atwww.lancelab.com.© 2014 Lance Lab Ltd™Please observe the safety information provided in the TC 1 operatingmanual to avoid injury, loss of life and damaged equipment.DO NOT SUBMERGE THE CAMERAHEAD IN LIQUID / WATER.ENSURE YOUR TC 1 IS STOREDAPPROPRIATELY TO AVOID DAMAGE. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved