Lambda pmn Instruction Manual

Contents

Lambda pmn Instruction Manual Manual pdf 16 page image

3.6.1 GROUNDING OF INPUT LINEThe supply is grounded through the ground terminal of the input connector. A protectiveground connection by the way of the grounding conductor in the input terminal is essentialfor safe operation.3.6.2 OUTPUT GROUND CONNECTIONIt is important that there be a ground connecting the supply to the load as shown inFigure 3-3.See Figure 2-1 and 2-2, for grounding cable configuration.Figure 3-3 Output Ground Connection3.6.3 FOR UNITS WITH O/P VOLTAGE ≤≤≤≤6kVThe ground connection is made via the shield of the RG58 coaxial HV output cableprovided with the supply.3.6.4 FOR UNITS WITH O/P VOLTAGE > 6kV:The ground connection between the load and the supply must be made with a separate wireto the 8-32, 1/2" NC long grounding stud provided on the supply.83-493-001 Revision G3 - 4 Installation