Record1. Connect the antenna to the ‘RF IN’ port on therear of the LabSat 3 Wideband.www.labsat.co.ukQuick Start Guide2. Place the antenna in the middle of the car roof.3. Ensure you have selected the correct recordsettings (i.e. quantisation, bandwidth,frequency).4. Press the ‘REC’ button to start recording.5. Drive the desired route.TIP: Record at least 4 minutes of stationary data to allow foracquisition later.6. Press the ‘REC’ button again to stop recording.

LabSat 3 Wideband Quick Start Manual

3 Wideband

Introduction

Components

LabSat 3 media

Quick start guide

Menu Layout

Replay operation in detail

Record operation in detail

Navigating the LabSat HDD file layout

Battery operation and charging

Battery fitting, removal and handling

External reference clock input

Expansion connector

DIGITIZE mode

Filtering CAN frames

Digital in/out

Ordering information

Converting LabSat scenarios

Recommended media

SatGen software

Troubleshooting guide

LabSat 3 specifications

Connector pin data

LabSat 3 dimensions

Contact information

LabSat 3 Wideband Quick Start Manual

Product

Learn More

Legal