La Marzocco Swift EPSb Troubleshooting Manual

Also see for SWIFT EPSB: Manual User manual

Contents

La Marzocco Swift EPSb Troubleshooting Manual Manual pdf 7 page image

76. Equipment Operating InstructionsEngaging the portafilterThe portafilter engages directly to the Swift EPSB. Since the Swift EPSB has no watertight seal, it isnot necessary to force the portafilter into place. Engage the portafilter with only a light amount offorce. If the grinder shifts on the counter top, you are using too much force.Engage portafilter gently There is no need to force it into positionOperating the SWIFTOnce the portafilter is engaged, press one of the start buttons located at the front of the SwiftEPSB . The right and left buttons correspond to the right and left bean hoppers. Coffee will beground, dosed, and tamped from one of these hoppers, depending on which button you press.The red indicator lights located above the start buttons are illuminated when the Swift EPSB isgrinding and tamping. Wait for the light to turn off before removing the portafilter. Once the redlight corresponding to the button selected is no longer illuminated, you may remove the portafilterfrom the Swift and engage it into the espresso machine.The Swift EPSB tamps the coffee as it is ground. When the volume of ground coffee in theportafilter reaches the set level, the grinding motor turns off. The tamping motor continues to runfor 1-3 seconds, "polishing" the tamped coffee.1 2