Menu
LAUNCH TECH X-431 V User Manual
                                          | |
Contents
| 
LAUNCH X-431 V User Manual — Wi-Fi Setup93 Wi-Fi SettingNote: If you don’t need to use Wi-Fi for a while, you can turn it off to conservebattery life.X-431 V has built-in Wi-Fi that can be used to get online. Once you’re online,you can register your X-431 V, browse the Internet, get apps, send email andcheck for software updates.3.1 Connect to a Wi-Fi network1. On the home screen, tap Settings > WLAN.2. Slide the Wi-Fi switch to ON, X-431 V will start searching for availablewireless networks.3. Select a wireless network,y If the chosen network is open, X-431 V will connect automatically;y If the selected network is encrypted, a network password will need to beentered.4. When “Connected” appears, tap to exit and return to the home screen.Note: When Wi-Fi is not required, this should be disabled to conserve batterypower.Once it is connected successfully, tap the Wi-Fi network from the list to view itsname, link speed, security type, IP address etc.When this tool is in range, it will connect to the previously linked networkautomatically.3.2 Disconnect from a Wi-Fi network1. On home screen, tap Settings > WLAN.2. Tap the network with a Connected status, then tap “Disconnect”. |
Related manuals for LAUNCH TECH X-431 V
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved