KitchenAid KUDD03DT Series Technical Education

Also see for KUDD03DT: Installation instructions User instructions Specifications Specifications

Contents

KitchenAid KUDD03DT Series Technical Education Manual pdf 44 page image

4-8Electrical Shock HazardDisconnect power before servicing.Replace all parts and panels before operating.Failure to do so can result in death or electrical shock.WARNINGREMOVING THE FINE DRAIN COIL AND TURBIDITY SENSOR / THERMISTOR1. Unplug dishwasher or disconnect power.2. Turn off the water supply to the dishwasher.3. Remove the tub and bottom cover (seepages 4-6 & 4-7).4. Disconnect the wiring connector from thefine drain coil, remove the screws, andremove the coil.6. Access and remove the coarse cup andfilter flow plate (see “Removing TheCoarse Cup, Wash Arm, And Filter FlowPlate,” page 4-4).7. Remove the screws from the compres-sion ring and fine drain.8. Remove the fine drain seal and plunger,and the plunger spring. You may need touse a small screwdriver to remove the finedrain spring.Fine Drain Coil ScrewsWiring ConnectorO-RingCompression Ring& Fine Drain ScrewsFine Drain Seal& PlungerPlunger SpringTurbidity Sensor Screws5. Disconnect the wiring connector from theturbidity sensor/thermistor, remove thescrews, and remove the sensor. NOTE:There is an O-ring on the turbidity sensorhousing.Wiring Connector