KitchenAid KUDC10FXSS Installation Instructions Manual

Also see for Architect II C Series KUDC10IXSS: Installation instructions User guide Energy guide

KitchenAid KUDC10FXSS Installation Instructions Manual Manual pdf 23 page image

23Remove towel from dishwasher. Reinstall the lower dishrack.Remove towel and replacelower dishwasher rack7If needed, see website for animated representationof this step. Visit www.kitchenaid.com/anchoring underFAQ tab.1 Reinstall access panelsGrGroundingoundingclipclipGroundingclipInsulationInsulation(on some models)LowerpanelAccesspanelComplete Installationplasticbutton6 Check side attachmentNOTE: You must drill pilot holes in cabinet to avoidsplitting the wood before installing screws.If securing with a side attachment, check that sides ofdoor do not rub against the screw heads. If they do,dishwasher must be re-centered. When dishwasher isproperly centered, replace plastic buttons.Bottom Sound Pad Installation(on some models)1. Remove the bottom sound pad from inside thedishwasher and take it out of the plastic bag.2. Place pad on the floor in front of the dishwasher,making sure lettering is facing up and vinyl pad facesdown.3. Fold up and hold the side panels down. Slowly slidethe pad toward the back of the dishwasher as far as itwill go, making sure not to push or pull any wires orhoses. (Do not force.) Side panels will open to properposition.NOTE: If there are pipes or other obstructions comingup through the floor, you will need to cut a slit in thepad to fit around the obstacle.4. Fold the front end of the pad up into position. Makesure the vinyl pad is tucked up behind the door andthe dishwasher front legs, as shown.